This image represents the series, but may not be the exact part.

63/32-2RSNRC3 Ball Bearing Sealed with Snap Ring And Groove PFI 32x75x20mm

Quick Order Code: 28641

Deep groove ball bearings are versatile, self retaining bearings with solid outer rings, inner rings and ball cage assemblies.

Availability: 20In stock
Want more than we show, or require a bulk item price? - please use Quote button
£9.60 £8.00
  • Available single or double row
  • Due to the raceway geometry and the balls used as rolling elements, deep groove ball bearings can support loads in both directions, as well as radial loads
  • Available in standard, C2, C3, C4, C5 clearance fit

Available as Open, Sealed or Shielded

  • Open  -  These bearings have no seals or shields to prevent the ingress of contaminating particles entering the raceways, this does however make them particularly useful when fitting in gearboxes or running in oil
  • Sealed  -  These bearings have the suffix 2RS indicating they have lip seals on both sides and are pre-filled with grease for life, so no lubrication is required. The seals give some protection against ingress of moisture and contaminating particles entering the raceways, thus increasing the life of the bearing. Some applications require only 1 seal which can easily be removed.
  • Shielded  -  These bearings have the suffix 2Z or ZZ indicating they have gap shields on both sides and are pre-filled with grease for life, so no lubrication is required. The shields give some protection against ingress of moisture and contaminating particles entering the raceways, thus increasing the life of the bearing. Some applications require only 1 shield which can easily be removed.
In the very unlikely event that we should not have available free stock , a quality brand will be supplied.

If large quantities are required click add to quote.

More Information
Brand = PFI
Inside Diameter = 32.000mm
Outside Diameter = 75.000mm
Width = 20.000mm
Seals or Shields = Rubber Seals = These bearings have the suffix 2RS indicating they have lip seals on both sides and are pre-filled with grease for life, so no lubrication is required. The seals give some protection against ingress of moisture and contaminating particles entering the raceways, thus increasing the life of the bearing. Some applications require only 1 seal which can easily be removed.
Material = Steel
Clearance = C3 = Internal clearance, simply put, a greater internal clearance between the inner race, outer race and the rolling element, when heat is generated the rolling element expands into the clearance incorporated in production
Rows of Balls = 1
Snap Ring Groove = Yes With Snap Ring
Image = Image represents the series, but may not be the exact part
Alternative Brand = In the very unlikely event that we should not have available free stock in the listed brand, then a quality brand will be supplied.
Write Your Own Review
You're reviewing:63/32-2RSNRC3 Ball Bearing Sealed with Snap Ring And Groove PFI 32x75x20mm
Your Rating

Product Questions