Loading...

General Questions (20)

349 views   August 23, 2022

  • what material are these made from?

    Thank you for the enquiry, the material of these bearings would be chrome steel SAE 52100.   Kind regards Ryan
    Read more

  • Are the seals on this bearing LLB both sides, or LLB/LLU?

    Thank you for the enquiry, on this item the seals on both sides of the bearing are LLB type. 
    Read more

  • Do you have this bearing in Ceramic CH DRF 2941 LLB BO

    Thank you for the enquiry David but unfortunately no we do not offer this bearing in ceramic. Kind regards Ryan
    Read more

  • if purchase 2set ,Can you send me exact drawing of This 1108-1" Taper Lock Bush For Shaft Fixing for our machining bore of our pulley .

    Thank you for the enquiry, please see description below for measurements etc.   Inside Diameter: 25.40mm = 1 inchOutside Diameter: 38.38mmWidth: 22.3mmUsage Parallel Shafts OnlyScrew Qty 2Screw Size 1/4 Whitworth 1/2 i...
    Read more

  • what is the dynamic and static load for this product please?

    Load rating is 84 KN
    Read more

  • what is the spherical tolerance & what is your price for a bulk order?

    Hi Brian thank you for the enquiry, the silicon nitride balls we stock are GD5. Ball Diametre Tolerance = +0.000005" If of interest can you advise how many you require?   Regards Ryan
    Read more

  • Hi, does this come as the plain bearing please, or as a kit with either/both of the retaining circlip and driveshaft nut, please?Thanks

    Thank you for the enquiry, with this item it is just the wheel bearing that we would be supplying. Doesnt come with a circlip ir nut unfortunately.   Regards Ryan
    Read more

  • Can you supply a rear wheel bearing for Nissan president 2004 pgf50

    Thank you for the enquiry, unfortunately we are not able to go by the vehicle but if you can advise the part number or sizes of the bearing we can have a look into this.   Regards Ryan
    Read more

  • Quick Order Code: 11978Hello is it the same part as this part:https://sharkbuggyshop.com/18-Kugellager-Radlager-hinten-FWD305532-standard-Kinroad-650Best regards

    Thank you for the enquiry, yes this is the same part just a difference brand. We would be offering PFI from stock.   Regards Ryan
    Read more

  • Can you possibly confirm what flange width this is please? On the webpage it says 2mm (my requirement) yet other websites are saying 3mm? Also do you have a data sheet for the part? I'm looking for the maximum loading it can take...

    Hello, yes the flange width is 3mm
    Read more

  • Are any of your bearings suitable to replace the bearings in my Elu MOF 96e, series 3 router.With thanks.

    Thanks for the enquiry, can you advise the size of the bearing you need? The product listing you are currently on are Stainless steel but also budget. I would suggest a branded bearing would be a better option for this application. Regards Ryan
    Read more

  • What are the sizes of the chamfer, only the angles are given. This dimension determines how far the bearing will insert into the head tube

    Thank you for the enquiry, going by measuring these physically the chamfers are 2.5mm both inside and outside.     
    Read more

  • Thanks, 2.5mm is sufficient info for the 45deg inside chamfer, could you specify the direction for the 36deg outside chamfer please?

    Sorry I do not understand the question the size of both chamfers are 2.5mm
    Read more

  • Are these 25 degree brgs? are they stackable? thanks

    Thank you for the inquiry, these bearings are 15° and can be mounted in any arrangement.
    Read more

  • Good afternoon..... I wanted to ask if these bearings are maintenance free or require some special lubrication?Thank youbest regards

    Thank you for the inquiry, yes these bearings are maintenance free type, no lubrication required.
    Read more

  • Can you advise does the Koyo 63/28 SH29TC3 (210907) deep groove ball bearing have a heat treated inner ring?

    Thank you for the enquiry, yes you are correct this bearing is heat treated on the inner ring. SH2 part of the reference confirms this. Regards Ryan
    Read more

  • What is the OD of the end of outlet tube?

    Hi James thanks for the enquiry the OD of the plastic tube = 18mm    Hope this helps, kind regards Ryan
    Read more

  • What is the difference between a 204 RY2 and a 204PY3 bearing. I assume they have different types of seals. Which one is better to prevent contamination from fine dirt?

    Thank you for the enquiry, we actually have these references down as being the same part. Believe different part numbers are used depending on the manufacturer but from what we understand they are the same. Both triple sealed bearings.   Hope this ...
    Read more

  • Are these a budget bearing.Are these as good as an open bearing. Thanks.

    Hi, yes these are a Chinese import. Regarding the second part of your question "are they as good as open" they are a shielded bearing yes, you can always remove them if required.
    Read more

  • could i have the sizes please width dia bolt hole cheers

    Thank you for the enquiry, the hole diameters on this bearing are 20mm one side & 8.4mm the other.
    Read more