6001 Ball Bearing Deep Groove Open Budget 12x28x8mm
Deep groove ball bearings are versatile, self retaining bearings with solid outer rings, inner rings and ball cage assemblies.
Availability:
733In stock
Want more than we show, or require a bulk item price? - please use Quote button
£1.40
£1.17
- Available single or double row
- Due to the raceway geometry and the balls used as rolling elements, deep groove ball bearings can support loads in both directions, as well as radial loads
- Available in standard, C2, C3, C4, C5 clearance fit
Available as Open, Sealed or Shielded
- Open - These bearings have no seals or shields to prevent the ingress of contaminating particles entering the raceways, this does however make them particularly useful when fitting in gearboxes or running in oil
- Sealed - These bearings have the suffix 2RS indicating they have lip seals on both sides and are pre-filled with grease for life, so no lubrication is required. The seals give some protection against ingress of moisture and contaminating particles entering the raceways, thus increasing the life of the bearing. Some applications require only 1 seal which can easily be removed.
- Shielded - These bearings have the suffix 2Z or ZZ indicating they have gap shields on both sides and are pre-filled with grease for life, so no lubrication is required. The shields give some protection against ingress of moisture and contaminating particles entering the raceways, thus increasing the life of the bearing. Some applications require only 1 shield which can easily be removed.
In the very unlikely event that we should not have available free stock , a quality brand will be supplied.
If large quantities are required click add to quote.
| Brand | = | RVH |
|---|---|---|
| Inside Diameter | = | 12.000mm |
| Outside Diameter | = | 28.000mm |
| Width | = | 8.000mm |
| Seals or Shields | = | None |
| Material | = | Steel |
| Clearance | = | CN = Standard Internal clearance |
| Rows of Balls | = | 1 |
| Dynamic Load Capacity (N) | = | 5070 |
| Static Load Capacity (N) | = | 2360 |
| Limiting Speed Grease (r/min) | = | 26000 |
| Limiting Speed Oil (r/min) | = | 32000 |
| Image | = | Image represents the series, but may not be the exact part |
| Alternative Brand | = | In the very unlikely event that we should not have available free stock in the listed brand, then a quality brand will be supplied. |
Write Your Own Review