Bright Zinc Galve Spray 400ml Tygris R224
Professional cosmetic finishing and protection
- Buy 12 for £8.52 £7.10 each and save 42%
- Buy 48 for £7.44 £6.20 each and save 50%
A bright zinc and aluminium powder based spray used for the cosmetic finishing and protection of previously galvanised surfaces where the component has been cut or welded, thereby exposing metal to the air. Zinc is a sacrificial metal and will prevent oxidisation and corrosion. Resins in the coating cause it to bond firmly to the substrate.
- Zinc content assists in corrosion prevention
- Resistant to salt spray and weathering
- Excellent heat resistance
- Aluminium powder to make for colour comparison
- with galvanised surface
- Can be used on previously coated surfaces
- High purity powders
- Excellent adhesion
- Quick drying
Directions for Use: Ensure surface to be coated is clean, dry and free from grease. Shake can until agitator ball can be heard and then for a further 1 to 2 minutes. Spray from 25-30 cm, building up layers in light coats. Allow 10 minutes drying time.
If larger quantities are required please use the "Add to Quote" button.
|Odour||=||Characteristic paint aroma|
|Contents||=||Blend of modified alkyd resin, zinc and aluminium powders (31.7%), treated clay, xylene, butyl acetate, acetone and 1-methoxy-2-propanol in a butane/propane propellant|
|Temperature Range||=||150˚C continuous 400˚C intermittent|
|Solubility||=||Insoluble in water|