Welcome to our online store...

Henderson BearingsHenderson Bearings

  • Free delivery on all UK orders over £10
  • Standard UK delivery
  • Next day UK delivery available
  • Safe and secure payments

Cylindrical Roller Bearings

Cylindrical Roller Bearings

Single row cylindrical roller bearings with cages are units comprising solid inner and outer rings and cylindrical roller and cage assemblies. The outer rings have rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling. 

The cylindrical roller bearings have high rigidity, high radial load carrying capacity and, due to the cage, are suitable for higher speeds compared to full complement designs. Bearings with the suffix "E" have a higher capacity roller set and are thus designed for very high load carrying capacity.

The bearings are separable and therefore easier to fit and dismantle. Both bearing rings can be given a tight fit by this process. Single row cylindrical roller bearings with a cage are available as non-locating, semi-locating and locating bearings.

  • Sealing/Lubricant  - The bearings are supplied without seals. They can be lubricated from the end faces
  • Non-locating bearings - Cylindrical roller bearings NU and N are non-locating bearings and can support radial forces only
  • Semi-locating bearings -  Cylindrical roller bearings NJ are semi-locating bearings. Semi-locating bearings can support not only high radial forces but also axial forces in one direction and can therefore guide shafts axially in one direction. They act as non-locating bearings in the opposite direction.
  • Non-locating bearings - Non-locating bearings NU can be combined with an L-section ring HJ to form a semi-locating bearing unit. Caution! Bearings NU must not be installed with two L-section rings - as there is a risk of jamming.
  • Locating bearings - Cylindrical roller bearings NUP and NJ with HJ are locating bearings. locating bearings can support not only high radial forces but also axial forces in both directions and can therefore guide shafts axially in both directions
  • Bearings with rib washer - Type NUP has two ribs on the outer rings and one rigid rib on the inner ring. A loose rib washer is fitted on the opposite side
  • Bearings with L-section ring - Type NJ with HJ has two ribs on the outer ring, one rib on the inner ring and an L-section ring for both ribless side of the inner ring.
  • L-section rings - L-section rings are advantageous where, under high loads, the seating surface of the inner ring in NUP bearings with a loose rib washer is too small to provide a sufficiently high bearing seat. In some applications, they fit and dismantle the bearings.
  • Cages - Suffix M1 indicates bearings with brass cages guided by rollers. Higher strength cylindrical roller bearings with the suffix TVP2 have a cage made from glass fibre reinforced polymide PA66

Please use the navigation software on the left of the page to edit your search, If you can't find what you are looking for and need assistance please do not hesitate to contact one of our sales professionals Tel:-01425-477787, or email sales@hendersonbearings.co.uk


Items 1 to 15 of 71 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Items 1 to 15 of 71 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Cylindrical Roller Bearings
Minimal Price: £26.98